Description

Get quality sleep at last with the AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier from ResMed.With auto-adjusting pressure, advanced event detection, and integrated humidification, this premium BiLevel device is whisper-quiet and offers screen-dimming capabilities for a restful night.

No Return, No Exchange Policy applies.

Warranty:
2 years service warranty
1-year warranty for parts replacements

The AirCurve 10 VAuto Bilevel Machine with HumidAir Heated Humiifier is ideal for:
? Light sleepers
? Allergy sufferers
? If you are new to CPA
? If you are seeking app integration technology

Noiseless and Portable for Your Comfort and Convenience
Enjoy a night of quiet rest, as this BiPAP machine clocks in at just 27 decibels. Weighing less than three pounds, the ResMed AirCurve 10 VAuto is easy to transport and meets the FFA requirements for all phases of air travel.

Superior Data Reporting up to 365 Sessions
Sleep data therapy is recorded directly to the machine?s memory, which holds compliance information for 365 sessions of use and detailed data reporting for 30 sessions. Each VAuto machine includes an SD card where you can download all data.

Experience Fewer Doctor Visits with Automatic Prressure Adustments
The AirCurve 10 VAuto can also function as a CPAP machine, but offers several modes that help you acclimate to the therapy pressure and can eliminate doctor appointments through the device?s automatic adjustment function. In Auto Mode, this device will automatically adjust to the exact pressure needed; when you select CPAP Mode, you will experience gradual, incremental increases in baseline pressure before reaching the prescribed pressure. CPAP Mode also offers Expiratory Pressure Relief (EPR), which helps you fall asleep easier and achieve more natural sleeping patterns and normal breathing.

User-Friendly Display Screen Easy-to-Read Menu
Customize your sleep with these settings on the color LCD display screen with the easy-grip dial: ? Ramp Time: Ease into therapy with a period of lower pressure or select the AutoRamp function to let the device adjust therapy pressure based on when sleep begins.
? SmartStart: Once the BiPAP machine senses breathing, therapy will automatically start.
? Humidity Level: Choose between one (lowest) and eight (highest), or shut the humidity setting off completely.
? Run Warmup: Preheat the humidifier water before starting therapy with the Run Warmup setting.
? Mask Fit: Ensure proper mask fit with a seal integrity check. You will see a green smiling face for a good fit or a red frowning face for a poor fit.
? Leak Alert: Continuous beeping will alert you if a large leak or mask removal is detected.

Modes: CPAP/ bi-level/ spontaneous
Pressure: 4 to 25 cm

Physical – device and water tub
Dimensions: (H x W x D): 4.57″ x 10.04″ x 5.91″
(116 mm x 255 mm x 150 mm)
Air outlet (complies with ISO 5356-1:2004): 22 mm
Weight (device and standard water tub): 44 oz (1248 g)
Weight (device and cleanable water tub): 44 oz (1248 g)
Housing construction: Flame retardant engineering thermoplastic
Water capacity: To maximum fill line 380 mL
Standard water tub – material: Injection molded plastic, stainless steel and silicone seal
Cleanable water tub – material: Injection molded plastic, stainless steel and silicone seal

Temperature
Maximum heater plate: 154?F (68?C)
Cut-out: 165?F (74?C)
Maximum gas temperature: ? 106?F (? 41?C)

Air filter
Standard: Material: Polyester non woven fiber
Average arrestance: >75% for ~7 micron dust
Hypoallergenic: Material: Acrylic and polypropylene fibers in a polypropylene
carrier
Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron
dust
90W power supply unit
AC input range: 100?240V, 50?60Hz 1.0?1.5A, Class II
115V, 400Hz 1.5A, Class II (nominal for aircraft use)
DC output: 24V 3.75A
Typical power consumption: 53W (57VA)
Peak power consumption: 104W (108VA)

Environmental conditions
Operating temperature: +41?F to +95?F (+5?C to +35?C)
Note: The air flow for breathing produced by this therapy
device can be higher than the temperature of the room.
Under extreme ambient temperature conditions
(104?F/40?C) the device remains safe.
Operating humidity: 10 to 95% relative humidity, non-condensing
Operating altitude: Sea level to 8,500′ (2,591 m); air pressure range 1013 hPa to
738 hPa
Storage and transport temperature: -4?F to +140?F (-20?C to +60?C)
Storage and transport humidity: 5 to 95% relative humidity, non-condensing

Electromagnetic compatibility
The AirCurve 10 complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC 60601-1-
2:2014, for residential, commercial and light industry environments. It is recommended that mobile communication devices
are kept at least 1 m away from the device.

Q. Why do the AirSense? 10 and AirCurve? 10 devices come with the HumidAir? heated humidifier built-in?
A. The air delivered during therapy may overwhelm the body?s ability to add heat and moisture, which can lead to a sore, dry throat, nasal congestion, or a runny nose. Heated humidification has been shown to help minimise the side effects associated with positive airway pressure therapy, and help make it a more comfortable experience.1 Given the positive impact heated humidification can have, ResMed combined the humidifier and the device to make it easier for therapy users to receive these benefits.

Q. Can I use the HumidAir? heated humidifier without a water tub?
A. The device will work without water in the tub but you?ll need to insert it into the device and turn humidification off in the My Options menu. If you don?t want to use the humidifier, you?ll need to insert a side cover into the device.

Q. How do I know if my humidifier is working?
A. Icons are displayed on the device screen to indicate when the humidifier is heating up or cooling down. The Sleep Report option on your AirSense? 10 or AirCurve? 10 device will indicate that your humidifier is working properly with a smiley face icon. See your user guide for a detailed list of icons and their descriptions.

Q. What does the humidifier smiley face in Sleep Report mean?
A. This means that the humidifier is working as intended for the current settings, and that there is no hardware fault.

Q. What happens if the water tub runs out of water?
A. Your device will function normally and safely without water in the tub, but it will no longer provide humidification.

Q. What is warm-up mode?
A. The HumidAir? heated humidifier will rise to a target temperature of 40?C over 20 minutes. The device then holds this temperature for a further 10 minutes, ready for therapy to start. If therapy does not commence in that time, the device will automatically enter cool-down mode, where it will blow a small amount of air for around 20 minutes to stop condensation forming in the device.

o Auto-Adjusting BiLevel Machine
o Built-In HumidAire Heated Humidifier
o Standard Water Chamber
o 6 Ft SlimLine Tubing – 15mm Diameter
o Power Supply and Cord
o Travel Bag
o 1 – Standard Filter (Installed)
o Filter Cover
o SD Card – Inserted in Machine
o Patient Manual
o 1 CPAP mask